Controllerless Networks

Reply
Highlighted
Occasional Contributor II

IAP and Aruba Central deployment

Hello everyone,

 

I would like to be sure about something. When connecting an IAP (AP 303), is there something specific to configure on the IAP or other (DHCP option, DNS) to enable the discover of Aruba Central ?

 

If I connect an IAP and add it in Central with the correct licence, is it enough ? Do I need to configure something on Activate ? 

 

Thanks in advance for your help !

 

 

 

 

 

 

 


Accepted Solutions
Highlighted
Guru Elite

Re: IAP and Aruba Central deployment

You don't need to configure anything from Activate.  Everything is done in central.  Please see step 3 here: http://help.central.arubanetworks.com/latest/documentation/online_help/content/public_cloud/get_started/typical_workflow.htm


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post


All Replies
Highlighted
Guru Elite

Re: IAP and Aruba Central deployment

You don't need to configure anything from Activate.  Everything is done in central.  Please see step 3 here: http://help.central.arubanetworks.com/latest/documentation/online_help/content/public_cloud/get_started/typical_workflow.htm


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: