Controllerless Networks

Reply
Occasional Contributor I

IAP - ext Radius - dashboard should display name instead of ID

Hi (I open a separate thread for this question),

 

I am using an external FreeRadius server for WPA-Enterprise Auth.

The VC dashobard displays nicely the login-name for each client.

 

In my special setup the login-name is a numeric ID which does not speak for itself.

I would like to set a clear text name through the Radius answer back to the VC and the dashboard.

 

I tried to set the attribute

   User-Name = "John Doe"

in the response section but then the Authentication fails.

 

Any hints for me?

 

Thanks

Thomas

Guru Elite

Re: IAP - ext Radius - dashboard should display name instead of ID

You cannot change the username in the access-accept response for an 802.1X auth. You can only do this this with a MAC-auth.


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: