Controllerless Networks

Hi,

 

I have an IAP205 which is connected to a ADSL NTU (very simple setup)...I use the IAP to dish out IP address to all the wireless client.

 

How do I configure IP reservation in the IAP so that some of the wireless client will get the same IP whenever they get connected to the IAP?

 

I check the "DHCP server" menu but can't find any configuration (only those DHCP scoping)....Is IP reservation hidden somewhere?

 

Thanks

The internal DHCP server does not support reservations in IAP.

Thanks...

How about can I exclude certain range of IP in the IAP so that it would
assign that range? Ie. We will key in the static IP in those laptops...

You can configure a network range for clients ;  http://www.arubanetworks.com/techdocs/Instant_41_WebHelp/InstantWebHelp.htm#UG_files/DHCP_conf/DHCP Config.htm?Highlight=dhcp

I took a look at the URL but it doesn't solve my problem....The fields only
allow me to put in the subnet and mask. It didn't have any exclude field..

For example, I have 3 wireless printers with the static IP(10.1.1.201,
10.1.1.202, 10.1.1.203) configure in them. How do I ensure the IAP does not
dish out these 3 IPs when a wireless client connected to it?

In Cisco, they have this "ip dhcp exclude xxx" command to exclude IP from
the DHCP server...How do I do that in IAP?

You are right.  You cannot exclude anything with the virtual AP assigned DHCP server.  It is really intended for just guest networks...