Controllerless Networks

Reply
Occasional Contributor I

IAP205 - How to configure IP reservation to wireless client?

Hi,

 

I have an IAP205 which is connected to a ADSL NTU (very simple setup)...I use the IAP to dish out IP address to all the wireless client.

 

How do I configure IP reservation in the IAP so that some of the wireless client will get the same IP whenever they get connected to the IAP?

 

I check the "DHCP server" menu but can't find any configuration (only those DHCP scoping)....Is IP reservation hidden somewhere?

 

Thanks

Guru Elite

Re: IAP205 - How to configure IP reservation to wireless client?

The internal DHCP server does not support reservations in IAP.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: IAP205 - How to configure IP reservation to wireless client?

Thanks...

How about can I exclude certain range of IP in the IAP so that it would
assign that range? Ie. We will key in the static IP in those laptops...
Guru Elite

Re: IAP205 - How to configure IP reservation to wireless client?

You can configure a network range for clients ;  http://www.arubanetworks.com/techdocs/Instant_41_WebHelp/InstantWebHelp.htm#UG_files/DHCP_conf/DHCP Config.htm?Highlight=dhcp


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: IAP205 - How to configure IP reservation to wireless client?

I took a look at the URL but it doesn't solve my problem....The fields only
allow me to put in the subnet and mask. It didn't have any exclude field..

For example, I have 3 wireless printers with the static IP(10.1.1.201,
10.1.1.202, 10.1.1.203) configure in them. How do I ensure the IAP does not
dish out these 3 IPs when a wireless client connected to it?

In Cisco, they have this "ip dhcp exclude xxx" command to exclude IP from
the DHCP server...How do I do that in IAP?
Guru Elite

Re: IAP205 - How to configure IP reservation to wireless client?

You are right.  You cannot exclude anything with the virtual AP assigned DHCP server.  It is really intended for just guest networks...


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: