Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

IAP207mesh points rebooting by reason "mesh link BAD. rebooting mesh point by sapd"

This thread has been viewed 2 times

  • 1.  IAP207mesh points rebooting by reason "mesh link BAD. rebooting mesh point by sapd"

    Posted Nov 21, 2017 03:43 PM

    We have about 4 IAP207 mesh points connecting to mesh portal. 

     

    The points are rebooting with reason

    mesh link BAD. rebooting mesh point by sapd

     

    Advise what can be possible reasons?

     

    When two nodes IAP(that is mesh point and mesh portal), I usually set on on a static channel and set at some optimum power depending on the distance. 

     

    Can i still set all the APs in same channel for 5Ghz, and setup a mesh(in this case of 1 portal and 4 points, all are AP207).?

     



  • 2.  RE: IAP207mesh points rebooting by reason "mesh link BAD. rebooting mesh point by sapd"

    EMPLOYEE
    Posted Nov 21, 2017 03:52 PM
    How far apart are the access points?


  • 3.  RE: IAP207mesh points rebooting by reason "mesh link BAD. rebooting mesh point by sapd"
    Best Answer

    Posted Dec 28, 2017 07:29 AM

    mesh links became statble, after removing the non-dfs channels, from the valid channels. 

    The installation was found to be near to the airport.