Controllerless Networks

Reply
Regular Contributor I

IAP207mesh points rebooting by reason "mesh link BAD. rebooting mesh point by sapd"

We have about 4 IAP207 mesh points connecting to mesh portal. 

 

The points are rebooting with reason

mesh link BAD. rebooting mesh point by sapd

 

Advise what can be possible reasons?

 

When two nodes IAP(that is mesh point and mesh portal), I usually set on on a static channel and set at some optimum power depending on the distance. 

 

Can i still set all the APs in same channel for 5Ghz, and setup a mesh(in this case of 1 portal and 4 points, all are AP207).?

 

Guru Elite

Re: IAP207mesh points rebooting by reason "mesh link BAD. rebooting mesh point by sapd"

How far apart are the access points?

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Regular Contributor I

Re: IAP207mesh points rebooting by reason "mesh link BAD. rebooting mesh point by sapd"

mesh links became statble, after removing the non-dfs channels, from the valid channels. 

The installation was found to be near to the airport. 

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: