Controllerless Networks

Reply
Contributor II

IAP318, IAP315 AOS 8.4.2 flapping on 2930M

Hello,

 

I have AccessPoints (318, 315) connect on 2930M Poe Switches (Stacking), Mobility Master and Mobility Controller (7210).

 

I see on the mobilty master that some access points online and offline, online and offline.

 

on the 2930 switch I can see 

 

I 07/31/19 16:55:54 00076 ports: ST2-CMDR: port 3/39 is now on-line
I 07/31/19 16:55:54 00076 ports: ST2-CMDR: port 3/19 is now on-line
I 07/31/19 16:55:54 00076 ports: ST2-CMDR: port 2/33 is now on-line
I 07/31/19 16:55:54 00076 ports: ST2-CMDR: port 2/16 is now on-line
I 07/31/19 16:55:52 00076 ports: ST2-CMDR: port 3/6 is now on-line
I 07/31/19 16:55:52 00435 ports: ST2-CMDR: port 2/33 is Blocked by STP
I 07/31/19 16:55:52 00435 ports: ST2-CMDR: port 3/39 is Blocked by STP
I 07/31/19 16:55:52 00435 ports: ST2-CMDR: port 3/19 is Blocked by STP
I 07/31/19 16:55:52 00435 ports: ST2-CMDR: port 2/16 is Blocked by STP
I 07/31/19 16:55:50 00435 ports: ST2-CMDR: port 3/6 is Blocked by STP
I 07/31/19 16:55:49 00077 ports: ST2-CMDR: port 2/33 is now off-line
I 07/31/19 16:55:49 00077 ports: ST2-CMDR: port 2/16 is now off-line
I 07/31/19 16:55:49 00077 ports: ST2-CMDR: port 3/39 is now off-line
I 07/31/19 16:55:49 00077 ports: ST2-CMDR: port 3/19 is now off-line
I 07/31/19 16:55:42 00077 ports: ST2-CMDR: port 3/6 is now off-line

How can I troubleshoot why the APs flapping?

 

Greetings

Highlighted
MVP Guru

Re: IAP318, IAP315 AOS 8.4.2 flapping on 2930M

Looks like Spanning Tree (STP) is blocking some ports, can you confirm these are the ports which the APs terminate on?

 

I 07/31/19 16:55:52 00435 ports: ST2-CMDR: port 2/33 is Blocked by STP

What is the current spanning tree configuration within your deployment?


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)

Re: IAP318, IAP315 AOS 8.4.2 flapping on 2930M

Also if there is any mesh, ensure there's no loops.


Jerrod Howard
Distinguished Technologist, TME
Contributor II

Re: IAP318, IAP315 AOS 8.4.2 flapping on 2930M

Hello,

 

no mesh configuration - on the 2930 switch (3x stacking) there are only APs connected

 

STP is MST

 

 show spanning-tree

 Multiple Spanning Tree (MST) Information

  STP Enabled   : Yes
  Force Version : MSTP-operation
  IST Mapped VLANs : 1-4094
  Switch MAC Address : 8030e0-eb2cca
  Switch Priority    : 32768
  Max Age  : 20
  Max Hops : 20
  Forward Delay : 15

  Topology Change Count  : 4
  Time Since Last Change : 4 hours

  CST Root MAC Address : 548028-754700
  CST Root Priority    : 0
  CST Root Path Cost   : 2000
  CST Root Port        : 2/A1

  IST Regional Root MAC Address : 8030e0-eb2cca
  IST Regional Root Priority    : 32768
  IST Regional Root Path Cost   : 0
  IST Remaining Hops            : 20

  Root Guard Ports     :
  Loop Guard Ports     :
  TCN Guard Ports      :
  BPDU Protected Ports : 1/1-1/48,2/1-2/48,3/1-3/48
  BPDU Filtered Ports  :
  PVST Protected Ports :
  PVST Filtered Ports  :

  Root Inconsistent Ports  :
  Loop Inconsistent Ports  :

yes STP is working and block but why?  according the log it shows for me then the aps are connect to the port and unconnect

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: