Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Instant and trap SNMP

This thread has been viewed 3 times

  • 1.  Instant and trap SNMP

    Posted Mar 07, 2014 11:24 AM

    Hi,

     

    is that the IAP can send an SNMP trap when  there is an association and dissociation of the user terminal ? 

     

    regards

     

    Yann 



  • 2.  RE: Instant and trap SNMP

    Posted Mar 07, 2014 11:52 AM

    http://www.arubanetworks.com/techdocs/InstantMobile/Advanced/Content/Chapter26%20Log%20Servers%20and%20Troubleshooting/SNMPTraps.htm

    http://www.arubanetworks.com/techdocs/InstantMobile/Advanced/Content/Instant%20User%20Guide%20-%20volumes/SNMP_Parameters_for_.htm

    The current release of Instant supports SNMP management Information bases (MIBs) along with Aruba-MIBs. For information about Aruba MIBs, SNMP MIBs and SNMP traps, see the Aruba Instant 6.2.1.0-3.3 MIB Reference Guide.



  • 3.  RE: Instant and trap SNMP

    Posted Mar 10, 2014 09:06 AM

    Hi Kdisc98,

     

    thanks you for this information.

    After reading the Mib Doc, do you think if the "wlsxTrapTunnelStatus" trap below going to answer my need it ?

     

    wlsxTrapTunnelStatus

    Syntax Integer32
    Max-Access accessible-for-notify
    Status current
    Description This object represents the tunnel status.

     

    Regards

     

    Yann



  • 4.  RE: Instant and trap SNMP

    Posted Mar 12, 2014 10:47 PM

    Yann, I think this is the trap you want:

     

    wlsxNUserEntryCreated wlsxTrapUserIpAddress.0: 10.1.1.1, wlsxTrapUserPhyAddress.0: 12:13:21:B7:31:F1



  • 5.  RE: Instant and trap SNMP

    Posted Mar 12, 2014 10:50 PM

    Trap is sent as well when the user is deleted:

     

    wlsxNUserEntryDeleted wlsxTrapUserIpAddress.0: 10.1.1.1, wlsxTrapUserPhyAddress.0: 12:13:21:B7:31:F1

     

    IAP does not trap on a L2 association as far as I know.



  • 6.  RE: Instant and trap SNMP

    Posted Mar 14, 2014 03:32 AM

    Hi shahram

     

    Thanks you for your answer, i try it soon.

     

    Regards

     

    Yann