Is Dynamic Multicast Optimization (DMO) or D-DMO enabled by default in IAP firmware 22.214.171.124-126.96.36.199
10-26-2016 08:14 PM - edited 10-26-2016 09:15 PM
Hi everyone, I'm following old (and new) documentation showing how to enable DMO but I'm not seeing the option where the screenshots show them but in the IAPs text configureation report tab I can see that a DMO utilization threshold is configured.
Page 95 of attached user guide
Do I need to enable DMO or D-DMO in firmware v188.8.131.52-184.108.40.206 or is it already enabled by default?
Likewise for 'enable broadcast filtering'. There's nothing in the v220.127.116.11-18.104.22.168 GUI to 'enable broadcast filtering' but some of my IAPs have it enabled (ARP) and some don't. I'm assuming some had it configured in an old GUI before I bagan manageing them but that recent firmware updates have moved or hidden the options (and the ability to ssh onto the devices to check/fix it via CLI).
Re: Is Dynamic Multicast Optimization (DMO) or D-DMO enabled by default in IAP firmware 22.214.171.124-4.1.
10-27-2016 02:08 AM
The threshold is always configured. You still need to enable dynamic multicast optimization. DMO is always disabled by default.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba VIA ASE Solution - Configure VIA VPN