Controllerless Networks

Hi, folks.
I'd like to disable the Web GUI for the controller and only use the CLI
Is it possible to disable the Web GUI access ?

ArubaOS (MODEL: RAP-109), Version 6.4.2.0-4.1.1.0

regards,
-mitsu

No, this is not currently possible.

Hi Tim-san,

Thank you for replying.

 

OK

I'll try to insert a firewall rule which blocks traffic to the IP address of the controller using TCP 4343

 

Regards,
-mitsu

 

Take a look here:

http://www.arubanetworks.com/techdocs/Instant_41_Mobile/Advanced/Content/UG_files/Roles_and_policies/InboundTrafficMgmt.htm

Thanks for the info.

 

I tried the following config.

but it does not work.

 

inbound-firewall
 rule any any masterip 0.0.0.0 match tcp 4343 4343 deny

 

Thanks anyway.

 

I look for a different way.

 

Management access to the AP is allowed irrespective of the inbound firewall rule. For more information on configuring restricted management access, see Configuring Management Subnets.

you will need to configure the following:
http://www.arubanetworks.com/techdocs/Instant_41_Mobile/Advanced/Content/UG_files/Roles_and_policies/ConfMgmtSubnet.htm

I could be confirmed with this config.
Thanks a lot.