Controllerless Networks

Reply
Contributor I

Local, L2 DHCP scope

Hi,

 

We have recenlty installed some APs and we have configured a DHCP scope for the guest network. What I want to know is the type of the scope! If I choose the local type, only VC will release IP addresses to the clients, the other APs wont do this (I want to mention that we have no chance of configuring the uplink switches to let the traffic flow from other vlans, we have those dummy switches). In local mode I have to do then NAT on the guest SSID under the Access rules. As I said it works only if the clients connect to the guest via the Virtual Controller AP. So far so good knowing that we have limitations on the wired access enviroment. 

 

I want to move on Local, L2 and see if this will solve my problem regarding the leasing of IP addresses not only from the VC, but also from the other APs. Do you guys think that this type will be successful in my case and should I NAT the traffic or shouldn't I?

 

Thank in advance

Contributor I

Re: Local, L2 DHCP scope

Hmm after testing Local L2 DHCP type seems that this will not be much of the help either. So regardless of the DHCP type you use, the vlan which is specified on the dhcp scope should be present on the switches!

 

Can someone please verify this to me?! Because as I said on the first post, we have no chance of configuring the switches between the AP to tag the trafic.

 

Is there any possible way to do this, without having to configure the switches?

Super Contributor II

Re: Local, L2 DHCP scope

If you want to seperate the clients from the IAP network you have to create a new VLAN. Otherwise the clients are source NATed behind the IAP IP address. 


Willem Bargeman ACMX#935 | ACCX #822

Please give me kudos if my post was useful!
If your issue is solved mark the post as solution!
Contributor I

Re: Local, L2 DHCP scope

Hi,

 

Thank for the response! The guest vlan is on another vlan of course, it is separeted from the other SSID. The problem here is that only the VC is able to lease out IP addresses and the other AP are not. There is no chance for us to configure the uplink switches to forward dhcp queries from AP to the Virtual Controller. I am looking for another method that does not include the switch configuration. Just to mention it, in this environment there is only one Instant cluster and DHCP is located on the virtual controller. 

Super Contributor II

Re: Local, L2 DHCP scope

In that case use the local DHCP scope and set the VLAN to Virtual Controller managed. 

 

The VC will act as the DHCP server and the traffic is source natted behind the IAP IP.


Willem Bargeman ACMX#935 | ACCX #822

Please give me kudos if my post was useful!
If your issue is solved mark the post as solution!
Contributor I

Re: Local, L2 DHCP scope

I have already said it that we have done this and it works only for the clients who are connected on the AP that acts as the virtual controller. We want the other AP to be able to lease out IP addresses, not only the virtual controller. I have other costumers that this thing works, but it works because we could configure the vlans on the switches also. But this time this is not possible!

Contributor I

Re: Local, L2 DHCP scope

We have solved this problem. The reason why the other AP wasn't giving out IP addresses was that the VLAN created on the DHCP scope was not configured on the uplink switches (as mentioned before because of the limitation on that) so we changed the VLAN assignment from Custom to Default and on the access rules for the network we added allow any to all destination (dont forget before this rules you should probably add deny to the internal networks). Then on the system under DHCP setting we added the dns server (we are using google dns). After testing the client did an get IP address and everything was working fine. 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: