Controllerless Networks

Reply
Occasional Contributor I

Meshing on IAP205: pro's / con's

I'm looking for the pro's / con's using a Mesh construction between 2 IAP205.

 

Can somebody tell me if I loose streams or do I loose a whole antenna? I know a Mesh will be performing less when connecting directly on a cable. I'm looking for a small solution in a house, cabling is an issue right now. So that is why I'm looking into Meshing

Guru Elite

Re: Meshing on IAP205: pro's / con's

As long as there is good RF coverage between both access points you will have decent performance.  The big limiting factor is the resources that you would try to reach.  If your internet bandwidth is 20 megs, and you have good RF coverage between access points, you should not have a performance issue.  What is the bandwidth of the resources that you want to reach?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor I

Re: Meshing on IAP205: pro's / con's

Bandwidth will indeed be around 20 Mbit. Do I understand correct that I will keep my both radio's so I can connect on both 2.4 Ghz as 5 Ghz? 

Guru Elite

Re: Meshing on IAP205: pro's / con's

Yes. 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: