Controllerless Networks

New Contributor

Monitoring Mesh Performance



we have one Instant RAP 109 and one RAP105. The 109 is connected to the network by wire, the 105 is in meshed mode. Is there any way to monitor the "meshing performance" (don´t know how to name it better)? Means: How much bandwidth do I loose due to the meshing/the distance between the ap´s?

Is there any general guideline about how much bandwidth I can expect between two meshed nodes?




Guru Elite

Re: Monitoring Mesh Performance

You lose 1/2 of your performance for each hop.  Just like wireless, you can only expect half of the mesh negotitated link data rate, tops.  After that, overhead, interference and retries push down your performance.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba VIA ASE Solution - Configure VIA VPN
Search Airheads
Showing results for 
Search instead for 
Did you mean: