Controllerless Networks

aruba 3600-1 master 

3600-2 local

3600-3 local

7210-1 local  AP register on 7210-1

new 7210-2 will be set, and remove all 3600.

 7210-1 and 7210-2 configure master-local,

how can i do .The APs will not down.

What AP models do you have running on the current controllers? What version of code do you hope to get to when you're done?

 

AP 135 RAP108 AP205 AP305 

OS 6.4.4.16

So my recommendation would be to just stand up the new controllers and start from scratch. By the time you upgrade the existing hardware to swap from 3600 to 7200, and then fix up all the network interfaces, then upgrade to 8.x and corect any issues with that, you could have just started from scratch, manually rebuilt your config, and take one outage, instead of 3-4. 

thanks for you reply

1, I will upgrade new 7210 to 6.4.4.16
2, make new 7210 local upgrade the configure from master AC-3600
3, remove master 3600 ,by the time make new 7210 master, configure ip same as 3600




徐驰 | System Engineer 工程师
|北京普利讯科技发展有限责任公司|北京市朝阳区东四环中路远洋国际中心D座2106
| Cell: +86 18911817031 |Tel: +86 10 59081199 Ext. 6999 | Fax: +86 10 59081505
| E-mail: chi.xu@britel.net | 服务支持热线：4006504566

Is there any reason to be upgrading to AOS6? if possible AOS8 will be a better choice as new access points will require a firmware requirement of AOS 8 onwards.

For example AP535 will require AOS 8.5.0.0 onwards