Controllerless Networks

Reply
Occasional Contributor I

New IAP Installation

Hi,

 

During a new IAP installation , once the VC is elected and all other IAPs came up the status of interfaes on the switch to which these IAPs were shown UP, however IAP status on Airwave was shown down?

 

 

What could be the reason?

 

Guru Elite

Re: New IAP Installation

Instant APs must be added to Airwave.  They are not added automatically.

 

Please see the Aruba Instant Deployment Guide here:  https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Default.aspx?EntryId=21059

 

Start with "Setting Up Instant Manually" on page 12..


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Guru Elite

Re: New IAP Installation

Instant APs must be added to Airwave.  They are not added automatically.

 

Please see the Aruba Instant Deployment Guide here:  https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Default.aspx?EntryId=21059

 

Start with "Setting Up Instant Manually" on page 12..


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: