Controllerless Networks

last person joined: 22 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

Pass traffic through Virtual Controller IP

This thread has been viewed 2 times

  • 1.  Pass traffic through Virtual Controller IP

    Posted Jan 18, 2017 01:46 PM

    Setting up a small Virtual Controller managed network.

     

    Traffic passes through AP IP. Is there a way to pass traffic through Virtual Controller IP?

     

    My goal is to NAT the the VIP through the firewall to a different public IP.

     

    Currenlty, I can only seem to do this through the AP's IP.



  • 2.  RE: Pass traffic through Virtual Controller IP

    EMPLOYEE
    Posted Jan 18, 2017 01:48 PM
    If you setup an SSID that has a virtual-Controller assigned addressed vlan, it will NAT out of the IP address of the VC.


  • 3.  RE: Pass traffic through Virtual Controller IP
    Best Answer

    Posted Jan 18, 2017 02:28 PM

    Hi Colin,

     

    Thanks for the reply!

     

    I get this now. When Virtual Controller managed, traffic flows through the Virtual Controller Master IP, not the Virtual IP. This is by design.

     

    I also have the option to create a VLAN and exit through that.

     

     

    Thanks!



  • 4.  RE: Pass traffic through Virtual Controller IP

    Posted Jan 17, 2018 06:09 AM

    Dear All,

     

    I permit only for the VC IP to access the internet.

     

    there is a way to make the traffic pass through the VC not the Master IP?

     

    Regards