I must be missing something, is there a proper way to copy and paste CLI config into an IAP? If I just take a config and paste it into the CLI, it doesn't seem to be smart enough to identify new sections. I have to 'exit' out of each section before it will start a new one.
For instance, trying to paste in two ssid-profiles. It will finish the first one, but instead of going into the second one it will show a parse error.
Thanks.
IAP (config) # wlan ssid-profile Survey-5Ghz
IAP (SSID Profile "Survey-5Ghz") # enable
IAP (SSID Profile "Survey-5Ghz") # type employee
IAP (SSID Profile "Survey-5Ghz") # essid Survey-5Ghz
IAP (SSID Profile "Survey-5Ghz") # opmode opensystem
IAP (SSID Profile "Survey-5Ghz") # max-authentication-failures 0
IAP (SSID Profile "Survey-5Ghz") # vlan guest
IAP (SSID Profile "Survey-5Ghz") # rf-band 5.0
IAP (SSID Profile "Survey-5Ghz") # captive-portal disable
IAP (SSID Profile "Survey-5Ghz") # dtim-period 1
IAP (SSID Profile "Survey-5Ghz") # broadcast-filter arp
IAP (SSID Profile "Survey-5Ghz") # dmo-channel-utilization-threshold 90
IAP (SSID Profile "Survey-5Ghz") # local-probe-req-thresh 0
IAP (SSID Profile "Survey-5Ghz") # max-clients-threshold 64
IAP (SSID Profile "Survey-5Ghz") #
IAP (SSID Profile "Survey-5Ghz") # wlan ssid-profile Survey-2.4GHz
^
% Parse error
IAP (SSID Profile "Survey-5Ghz") # enable