Hi all,
I have 3 vlans :
- Vlan AP mgmt
- Vlan users
- Vlans user internet
2 SSID :
- One for users, getting IP from vlan users
- One with internet access, getting IP from vlan internet
Vlans are trunk on both side (IAP wired and Switch), pvid (native vlan) to vlan mgmt.
I am trying to configure centralized L3 dhcp, so clients connecting to ssid get IP from DHCP server.
DHCP is external and on another vlan/network, i need to do dhcp relay on IAP.
I have configure following instructions of User Guide :
(Instant AP)(config)# ip dhcp <profile-name>
(Instant AP)(DHCP Profile <profile-name>)# server-type <centralized>
(Instant AP)(DHCP Profile <profile-name>)# server-vlan <vlan-ID>
(Instant AP)(DHCP Profile <profile-name>)# dhcp-relay
(Instant AP)(DHCP Profile <profile-name>)# dhcp-server <DHCP-relay-server>
(Instant AP)(DHCP Profile <profile-name>)# vlan-ip <DHCP IP address> mask <VLAN mask>
(Instant AP)(DHCP Profile <profile-name>)# end
(Instant AP)# commit apply
My problem here is that clients don't get IP from DHCP, when i configure DHCP from WUI i have no problems. But when i configure from CLI, i have this message when i commit apply :
"Error here. no dhcp-relay configured yet"
I can reach DHCP from IAP.
Any ideas ?
Thanks
ps : IAP version : 6.4.2.6-4.1.1.11
Network on ssid is virtual controller managed and client VLAN assignement is custom on VLAN corresponding