Hello !
I have a scenario with 2 IAP 215. In the following SSID settings:
IAP IP address - VLAN 1
SSID ADM - Vlan 2
SSID GUEST - Vlan 12
Everything was running smoothly since installation (30 days ago). Today we had problem with one of the IAP. This was not delivering DHCP for SSID ADM and GUEST.
There was no change in the IAP or switch. The switch (HP) port which is connected with the AP this problem with the following configuration:
PVID: 1
Port link-type: trunk
VLAN passing: 1 (default vlan), 2, 12
VLAN permitted: 1 (default vlan), 2, 12
This is the same port configuration of another AP that is running fine.The IAP with problem this reporting the message attached.
How can I fix this problem believing that the settings are "correct"?