Controllerless Networks

Reply
Highlighted
Occasional Contributor II

Provisioning new IAP via remote access

Hello Guys,

Need to understand if I setup a DHCP server on branch router and plug the IAP to LAN switch, will I be able to access new IAP via HTTP (or HTTPS) over DHCP received IP  ? This is new branch site and don't have Internet access so no options of provisioning via Aruba activate.  Also I think Terminal access is disabled by default in new IAP so just want to check if it is possible to login via http or https over DHCP obtained IP ?

 

Thanks in advance for help.


Accepted Solutions
Highlighted

Re: Provisioning new IAP via remote access

Hi, 

 

Yes you can do that. You can https the ip address received via DHCP, this will open the VC Gui.

 

Also SSH access is enabled by default. Only telnet is disabled (which you can enable manually)




ACMP / ACSP / ACCP / ACEP / ACDX # 663
CCIE R/S - 37956

View solution in original post


All Replies
Highlighted

Re: Provisioning new IAP via remote access

Hi, 

 

Yes you can do that. You can https the ip address received via DHCP, this will open the VC Gui.

 

Also SSH access is enabled by default. Only telnet is disabled (which you can enable manually)




ACMP / ACSP / ACCP / ACEP / ACDX # 663
CCIE R/S - 37956

View solution in original post

Highlighted
Occasional Contributor II

Re: Provisioning new IAP via remote access

Thank You Ronin101

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: