Controllerless Networks

Frequent Contributor II

Quick walk through

I have 2 instant access points, i would like to have the second one mesh up but not re-broadcast the ssid, i want to use it as a bridge and use its ethernet ports (its a 205H) to connect a hardlined machine.

could someone give me a quick walk through?


Scott McNeil - Sr. Network & Security Engineer, Global Process Automation
Network+ | CWNA | CWTS | ACSP | ACMP | ACMA | BREC
Super Contributor I

Re: Quick walk through

Maybe this might work if you create different zones and only send out the ssid in one zone and use the mesh in instant. But I have not yet build this setup
Cheers, Frank
Aruba Partner Ambassador| AMFX#22| ACCX#613| ACMX#733| ACDX#744

If you like my posts, kudo's are welcome. If it solves your problem, please click 'Accept as Solution'

Re: Quick walk through

You will need to broadcast at least one SSID on a Instant Mesh AP, as the AP will consider itself unconfigured as it sees no SSID configured and wipe the config.


See: for a similar question.

If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
Showing results for 
Search instead for 
Did you mean: