we have a system with over 80 AP's (225 or 220 models) and they are managed by the Virtual Controller...
Can you still only assign the 5Ghz for the mesh and the 2.4 for clients without it affecting the rest of the system?
So it would only take affect for this 1 connection
or does the mesh have to be a stand alone system.
@jhoward wrote:
Depending on the client load, and distance since I didn't see it noticed, but whether you want to servie clients on the 5Ghz radio used for mesh is up to you (anything more than 2-4 clients on the 5Ghz radio will slow down the mesh backhaul. Otherwise, reserve the 5Ghz for mesh, do clients just on 2.4Ghz. If you need to separate the 5Ghz and 2.4Ghz for directional antennas, or want to put 2.4Ghz inside one building with 5Ghz mesh antenna outside, you can use the AP-374 (if AP is mounted outside) or AP-318 (if the antenna is located outside).