Controllerless Networks

Occasional Contributor I

Remove Virtual Cluster from Airwave

Here is my setup.  Dell branded airwave (Dell PowerConnect) version 8.2.2, and all of my VC are being configured via Airwave.  I have recently combined two VCs into a single one cannot figure out how to delete/remove the old now outdated VC.  Since everything is managed by Airwave even when I go into manage for this device I do not see a delete button.  I have attached a picture of what I am trying to remove, before I call support I figured I would ask see if anyone knows how to remove this.  Let me know if any additional info is needed on this.

MVP Guru

Re: Remove Virtual Cluster from Airwave



Can you go to APs/Devices and click on the device. Then select manage. Then delete.




ACCX #540 | ACMX #353 | ACDX #216 | AMFX #11

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Occasional Contributor I

Re: Remove Virtual Cluster from Airwave

That is what I thought I could do, but when I go to manage it just takes me to the VC list.  Maybe I am missing something?



Guru Elite

Re: Remove Virtual Cluster from Airwave

SSH directly into that AP and do this:


config t

no virtual-controller-key

commit apply


Reboot and see if that works.. 

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
Showing results for 
Search instead for 
Did you mean: