Controllerless Networks

Reply
Occasional Contributor II

Signal Slow and High Utilization

We have an issue where our Client are in Low Signal Strange and using Very high Utilization.

 

Each AP properly place far from each other. 

Guru Elite

Re: Signal Slow and High Utilization

What is the min and max transmit power for 2.4ghz under the ARM settings?  You probably have to lower the max for your 2.4ghz band.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor II

Re: Signal Slow and High Utilization

Hi Colin,

 

 

I have attach two screen show

 

1. Current Default, 

 

So base on your recommendatino i need to tick cusotmize and if so which number should i put for Max?

Guru Elite

Re: Signal Slow and High Utilization

Change the min and max to 12,


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: