Controllerless Networks

New Contributor

Spanning Tree with AP-387 Point to Point Link



I did a set up with an IAP 387 following this guide.

You can see  the setup in the photo attached.

It is currently working because I activated the bpdu filter on the interfaces the 387 aps are connected to.

But I don't really understand why they got blocked in the first place.

Do I have to disable the 5 GHz link somehow, becuase it creates a loop with the 60GHz link? And if that is the case how will the 5Ghz serve as a backup?

Is there any best practice for spanning tree over these types of point to point link?


Thanks for your help.



Search Airheads
Showing results for 
Search instead for 
Did you mean: