Controllerless Networks

Reply
New Contributor

Time Range Profiles

OK, Why does Aruba need to make this so difficult I will never understand. Meraki can do this in 3 clicks.  What I have is a cluster in Aruba Central with an SSID.  I want this SSID disabled after 5 PM and re-enabled at 7 AM.  Time Range Profiles setup is NOT working. I have tried countless number of settings and hours into this to get this to work with still no luck.  Can someone PLEASE verify how to get this done. 

 

SSID: IT

Network is NOT hidden and is not disabled under Misc

Time Range Profiles I have set to the specific time of 07:00 - 17:00 and I have chosen to enable and the SSID is still broadcasting. So I figure maybe its a play on words and I choose to Disable the Time Range Profile and STILL the SSID is broadcasting.  It is quite iiritating. 

 

I have Verified that my IAP controller VC has the correct TIME and Date and that NTP is enabled. 

 

Please HELP anyone. 

Guru Elite

Re: Time Range Profiles

If this is instant, please see the thread here:  https://community.arubanetworks.com/t5/Controllerless-Networks/Time-Range-Profile-Question/td-p/415476  It functions differently than ArubaOS and time range profiles will only enable and disable at the beginning and end of the time period.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
New Contributor

Re: Time Range Profiles

Thank you for your repsonse.  I have followed that guide that you have sent  but within Aruba Central I am getting the following errors. 

Guru Elite

Re: Time Range Profiles

If you can, try using a single time range profile, for now.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
New Contributor

Re: Time Range Profiles

Awesome  OK so I got this to work thank you, ONLY issue is with the hours you can see in the screen shot.  I have it set to be disabled on the 23 hour 59 Min but it is still showing as GREEN.  Any ideas? 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: