Controllerless Networks

Reply
Highlighted
All-Decade MVP 2020

Viewing AP radio channel mode for Instant / Airwave

Hi All,

 

when using a mobility controller, you can run the show ap bss table command to identify the channel width and mode (i.e. HT20 / VHT80)

 

What is the equivalent command for instant? Can this be seen in Airwave?

 

Scott


Accepted Solutions
Highlighted
Valued Contributor II

Re: Viewing AP radio channel mode for Instant / Airwave

HI Friend,

 

You can use the same command ( show ap bss-table) to get this information, look at "PHY" column. Airwave do not have any such command.

 

Please feel free for any further query on this.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]

View solution in original post


All Replies
Highlighted
Valued Contributor II

Re: Viewing AP radio channel mode for Instant / Airwave

HI Friend,

 

You can use the same command ( show ap bss-table) to get this information, look at "PHY" column. Airwave do not have any such command.

 

Please feel free for any further query on this.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]

View solution in original post

Highlighted
MVP Expert

Re: Viewing AP radio channel mode for Instant / Airwave

Hi scottdoorey,
as Venu mentions, run 'show ap bss-table' on the CLI for both the controller and IAP.
Venu, you can definitely run this command on Airwave.
Simply Navigate to the IAP-VC that you are interested in and select the drop down "Run command for all APs" and select "AP BSSID Table".
Highlighted
All-Decade MVP 2020

Re: Viewing AP radio channel mode for Instant / Airwave

thanks all for the responses. Looks like i'll be raising a feature request!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: