07-02-2015 07:55 PM
when using a mobility controller, you can run the show ap bss table command to identify the channel width and mode (i.e. HT20 / VHT80)
What is the equivalent command for instant? Can this be seen in Airwave?
Solved! Go to Solution.
07-02-2015 10:54 PM
You can use the same command ( show ap bss-table) to get this information, look at "PHY" column. Airwave do not have any such command.
Please feel free for any further query on this.
[Is my post helped you ? Give Kudos :) ]
Re: Viewing AP radio channel mode for Instant / Airwave
07-03-2015 05:30 AM
as Venu mentions, run 'show ap bss-table' on the CLI for both the controller and IAP.
Venu, you can definitely run this command on Airwave.
Simply Navigate to the IAP-VC that you are interested in and select the drop down "Run command for all APs" and select "AP BSSID Table".
ACDX #420 | ACCA
[If you found my post helpful, please give kudos!]