Controllerless Networks

Reply
Highlighted
All-Decade MVP 2020

Viewing IAP Zones in Airwave

Hi Everyone,


I have a customer using Airwave with IGC to manage IAP clusters. We are using zones for a few SSIDs to broadcast only in specific areas.

 

However I can't seem to find a way to see which IAPs are in which zone. You need to go to the IGC and click on each IAP to see which zone it is in, or you need to log into each VC to see the zones under the AP table.

 

Is there any way to get a list of all IAPs managed by AMP, and which zones the APs are assigned to?

 

Thanks,


_ELiasz

-------------------
ACDX, ACCP, CISSP, CWNA
Highlighted
New Contributor

Re: Viewing IAP Zones in Airwave

Hello,

 

Airwave should have all the features of IAP VC inbuilt, its really hard to filter out zones when we have hundreds of APs

Highlighted
MVP Expert

Re: Viewing IAP Zones in Airwave

Currently we dont have ZONE Colum option in Device>List >Device list section. If you have configured SSIDs based on specific zone on IAPs then you can create folder and move those device according to zone but if single IAP broadcastig multiple zone SSIDs then we dont have option to list.

 

File feature request

 

https://innovate.arubanetworks.com/portal_session/new


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: