Controllerless Networks

Reply
Highlighted
Occasional Contributor II

Virtual controller IAP cluster

Hello, i would like to ask. Can IAP-92 deployed as virtual controller manage AP-387?

 

What are the requirements for IAP cluster?

 

Thank you

Highlighted
MVP Guru

Re: Virtual controller IAP cluster

Hi, this would not work due to the age of the APs and firmware requirements.AP-387 requires a minimum firmware of AOS/InstantOS 8.4  An AP-92 will support a maximum of ArubaOS 8.2 or Instant 4.1.

 

The AP-387 is a Unified AP so therefore can be managed by Virtual Controller (Instant) mode without the need for an AP-92.


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Highlighted
MVP Expert

Re: Virtual controller IAP cluster

IAP-92 won’t be able to manage the 387 since the last supported released on the IAP-92 was Instant 4.1 and the 387 starts at InstantOS 8.4
https://www.arubanetworks.com/support-services/end-of-life/#AccessPoints

Sent from Mail for Windows 10
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: