Hi all,
I found the solution for this AP!
The problem was the uplink cable : it was connected to a small switch (8ports, non-manageable) and this seems to provoke the error message you raised :
Power Status
------------
Operational State POE-AF: Ethernet port 1 disabled; All radios disabled;
----------------- ------------------------------------------------------
Current HW State POE-AF: Ethernet port 1 disabled; All radios disabled;
LLDP Negotiated POE Power 0.0W
Then, I connected the AP on another plug (connected on another switch) and the AP booted correctly and now broadcast correctly the SSIDs configured on the VC (so the PoE injectors were not involved).
We have similar problem in another area on the same site.
There are few IAP-228 (4-5 on 12 in this area) which seem to have the same problem ; I found the same error message in the "show tech-support".
However, the network environment is not the same :
All the 12 IAPs are fixed at about 25 meters of the distribution switch (it's a ProCurve Switch 2520-8-PoE).
The data link is connected to switch and PoE injector and the Power+Data link (outgoing from the PoE injector) is connected to the IAP.
I tried to disable the poe on the switch ports, but it didn't fixed the problem.
Do you have an idea of workaround?
Thank per advance for your help
Best regards,
Jeremy