Controllerless Networks

Reply
Frequent Contributor I

Wired 802.1X EAP-TLS on IAP

Hello, is there a way to do wired 802.1X using EAP-TLS and factory certificates on IAPs? I've only found PEAP.

Tim Haynie, ACMX #508, CWNE #254, ACCP, CCNP R/S, CCNP Wireless, CCNA Security, CCDA
Highlighted
Guru Elite

Re: Wired 802.1X EAP-TLS on IAP

Frequent Contributor I

Re: Wired 802.1X EAP-TLS on IAP

Hi cjoseph, I upgraded to 8.5.0.4 and attempted to configure with the following result:

 

FRM-IAP-01 (config) # ap1x tls tpm
FRM-IAP-01 (config) # exit
FRM-IAP-01# commit apply
committing configuration...

does not support tpm yet!

 

It doesn't appear I can do this in the GUI either.

 

Any clue when this will be available?

Tim Haynie, ACMX #508, CWNE #254, ACCP, CCNP R/S, CCNP Wireless, CCNA Security, CCDA
Guru Elite

Re: Wired 802.1X EAP-TLS on IAP

What model access point is that?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Frequent Contributor I

Re: Wired 802.1X EAP-TLS on IAP

That happened on a 325.

Tim Haynie, ACMX #508, CWNE #254, ACCP, CCNP R/S, CCNP Wireless, CCNA Security, CCDA
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: