Controllerless Networks

Reply
Highlighted
New Contributor

ap-315 - Firmwareupdate via CLI - We could only upgrade image via master

Firmwareupdate via Webinterface does not work, since AP is not recognized.
Firmwareupdate on AP-315 via CLI quits with error:

 

AP06# upgrade-image

 

http ://xxx.xxx.xxx.xxx/fw/ArubaInstant_Hercules_8.6.0.4_74969

We could only upgrade image via master


Somebody knows a solution, how to fix it?

Highlighted
MVP Guru

Re: ap-315 - Firmwareupdate via CLI - We could only upgrade image via master

What is the error message that you see and what was the firmware version of the IAP before it was upgraded. Upgrading an IAP cluster via the Virtual Controller is the correct process.


What method are you using to upgrade via the GUI?


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Highlighted
MVP Guru

Re: ap-315 - Firmwareupdate via CLI - We could only upgrade image via master

Is AP06 your active VC? Upgrades in an IAP cluster should go through the VC, you cannot upgrade individual (non-VC) access points.

 

If you have multiple AP types in your cluster, you should provide URLs for each of the AP types with the same build number.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: