Controllerless Networks

Reply
New Contributor

can I simulate an IAP-215 with a IAP-225 for a Site Survey?

I need to do a Wireless Site Survey to a Client using a IAP-215(client requirements) but I only have a IAP-225 so I would like to know if modifiying some parameters in the IAP-225 I can simulate an IAP-215? Thanks!

Guru Elite

Re: can I simulate an IAP-215 with a IAP-225 for a Site Survey?

Are you doing an active or passive survey?

Are you measuring the 5ghz with 20/40/ or 80 mhz wide channels?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: can I simulate an IAP-215 with a IAP-225 for a Site Survey?

Hi cjoseph,

I'm doing a Passive survey and yes I'm measuring the 5ghz with 20/40

Guru Elite

Re: can I simulate an IAP-215 with a IAP-225 for a Site Survey?

What type of environment is this?  If it is an office environment, it should not be a problem.  If it is a warehouse, or something with high ceilings, you need to use the AP225.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: can I simulate an IAP-215 with a IAP-225 for a Site Survey?

it's an office enviroment

Guru Elite

Re: can I simulate an IAP-215 with a IAP-225 for a Site Survey?

You should be fine with that arrangement.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: