Controllerless Networks

Reply
New Contributor

dhcp scope creation on controller 3200 n


ip dhcp pool abc
default-router 172.26.104.1
dns-server 172.16.0.89 172.16.0.92
network 0.0.0.0 0.0.0.0                         >>>> unable to configure network as 172.26.104.0 255.255.255.0
authoritative

 

On controller, we are trying to create dhcp pool (172.26.104.0 255.255.255.0) , however in configuration it is showing as network 0.0.0.0 0.0.0.0.

 

Due to this RAP 3wn is getting converted and registered with controller however with different VLAN ip range.

 

Kindly assist.

Guru Elite

Re: dhcp scope creation on controller 3200 n

What network are you trying to configue?

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: dhcp scope creation on controller 3200 n

Trying to connect remote AP to the controller..and RAP Lan ip range is defined on controller

Guru Elite

Re: dhcp scope creation on controller 3200 n

RAP range is defined by the ipsec pool, not the dhcp pool.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: