Controllerless Networks

Reply
Highlighted
New Contributor

how do i see bandwidth utilization of individual user?

how do i see bandwidth utilization of individual user?


Accepted Solutions
Highlighted
Guru Elite

Re: how do i see bandwidth utilization of individual user?

In the GUI, you would go to Dashboard> Clients> select your client.  Then go to TX/RX stats.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post

Highlighted
New Contributor

Re: how do i see bandwidth utilization of individual user?

Highlighted
Guru Elite

Re: how do i see bandwidth utilization of individual user?

Wait....  Is this for instant?

You should be able to drill down into the client and see graphs of the clients current utilization...

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post

Highlighted
Guru Elite

Re: how do i see bandwidth utilization of individual user?

Yes, you should be able to drill down into the user:

1.png

2.png


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post


All Replies
Highlighted
Guru Elite

Re: how do i see bandwidth utilization of individual user?

In the GUI, you would go to Dashboard> Clients> select your client.  Then go to TX/RX stats.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post

Highlighted
New Contributor

Re: how do i see bandwidth utilization of individual user?

Highlighted
Guru Elite

Re: how do i see bandwidth utilization of individual user?

Wait....  Is this for instant?

You should be able to drill down into the client and see graphs of the clients current utilization...

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post

Highlighted
New Contributor

Re: how do i see bandwidth utilization of individual user?

Yes... this is for IAP (Instant access point)

Highlighted
Guru Elite

Re: how do i see bandwidth utilization of individual user?

Yes, you should be able to drill down into the user:

1.png

2.png


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post