Controllerless Networks

last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

how do you convert ap-103 from a CAP to a RAP

This thread has been viewed 0 times

  • 1.  how do you convert ap-103 from a CAP to a RAP

    Posted Jan 16, 2020 01:25 AM

    how do you convert ap-103 from a CAP to a RAP



  • 2.  RE: how do you convert ap-103 from a CAP to a RAP

    EMPLOYEE
    Posted Jan 16, 2020 01:32 AM

    No need to convert. When using a controller, any AP can be deployed as a campus or remote AP.



  • 3.  RE: how do you convert ap-103 from a CAP to a RAP

    Posted Jan 16, 2020 01:39 AM

    i have a 650 controller but not able to access to web GUI i have 12 AP 93's but not able to use them.  I have also a IAP-103 i ordered a AP-103 and it does not work with the IAP-103 any advice wold be apeciated i am stuck at the moment



  • 4.  RE: how do you convert ap-103 from a CAP to a RAP

    Posted Jan 16, 2020 01:43 AM

    seem the simple solution would be to order another IAP-103



  • 5.  RE: how do you convert ap-103 from a CAP to a RAP

    EMPLOYEE
    Posted Jan 16, 2020 02:01 AM

    Hmm, that's a wild mix of end-of-sale components.

    You could possibly get them all to work together in a controller based deployment, but that limits you SW choices to AOS 6.4, which is the only one supported by all of these components.

    An AP-103 cannot be converted to IAP-103, so it cannot be used in a controller-less (Instant) network.



  • 6.  RE: how do you convert ap-103 from a CAP to a RAP

    Posted Jan 16, 2020 02:18 AM

    i only need 4 AP's for this project i had the AP-93's left over from a project that they where not used on so i ordered the 650-us controller but not able to get it to work as well. That would have been my prefered method. instaed i had one IAP-103 I was able to setup and log in via the web GUI. so i have opted to us IAP-103's this is for my home network to connect my shop and my home to a mesh network. shop and home are on the same LAN

     

     



  • 7.  RE: how do you convert ap-103 from a CAP to a RAP

    EMPLOYEE
    Posted Jan 16, 2020 01:42 PM

    What AOS code version are you running on that 650 controller?

    Did you reset the AP-93 access points to factory defaults?