Controllerless Networks

Reply
Occasional Contributor I

iap 6.2 guest ssid - clients get redirect loop

Hello,

 

I have a new IAP105, upgraded to latest firmware 6.2.1.0-3.4.0.1_39461.  I've configured a guest SSID using the internal captive portal.  clients get an IP from the controller, but opening browser results in a redirect loop.  Currently set as basic as possible - IP address is VC-assigned, no access restrictions.  Any thoughts on resolving this issue?

 

thanks

iosman

MVP Guru

Re: iap 6.2 guest ssid - clients get redirect loop

Have you replaced the default certificate? The one shipped with that version was revoked and therefor will cause issues with browsers.

 

https://community.arubanetworks.com/t5/Controller-less-WLANs/ArubaOS-Default-Certificate-Revocation-FAQ-Instant/ta-p/275814

 

*Edit - Make sure your clients have a valid and working DNS server too.


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Occasional Contributor I

Re: iap 6.2 guest ssid - clients get redirect loop


@Craig Syme wrote:

Have you replaced the default certificate? The one shipped with that version was revoked and therefor will cause issues with browsers. 0xc004f074

 

https://community.arubanetworks.com/t5/Controller-less-WLANs/ArubaOS-Default-Certificate-Revocation-FAQ-Instant/ta-p/275814

 

*Edit - Make sure your clients have a valid and working DNS server too.


thanks my issue has been fixed.

Highlighted
MVP Guru

Re: iap 6.2 guest ssid - clients get redirect loop

Glad to hear it!

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: