Controllerless Networks

last person joined: 2 days ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

is it possible to have APs with different country codes linked to the same Master VC?

This thread has been viewed 0 times

  • 1.  is it possible to have APs with different country codes linked to the same Master VC?

    Posted Mar 25, 2016 01:14 PM

    See Subject Header.



  • 2.  RE: is it possible to have APs with different country codes linked to the same Master VC?

    EMPLOYEE
    Posted Mar 25, 2016 01:16 PM
    Since the country code is set at the VC, that would be no.


  • 3.  RE: is it possible to have APs with different country codes linked to the same Master VC?

    Posted Mar 25, 2016 01:40 PM
    I two US APs in my Home lab and one Worldwide. The US versions is of cause
    fixed and one of those is the one I prefer to be VC.
    At what level does the discovery protocol for Joining run? I suspect L2. Is
    that correct.

    If I can not use all my APs in the samr VC I will end up with 2 VCs
    (correct ?)

    Even by using two different IP subnets will this will still cause problems
    if the are on the same VLAN? Actually default VLAN.

    I f was to simulate solution with 2 APs in the US and one in a remote
    network in EU linked to the same network, what do I need to do?


  • 4.  RE: is it possible to have APs with different country codes linked to the same Master VC?

    EMPLOYEE
    Posted Mar 25, 2016 02:15 PM

    It will not join the cluster of the existing VC nor it'll become a separate VC. You need to convert it to standalone mode and use it with a different country code on the same VLAN.