Community Home > Discuss > Technology > Controllerless Networks > Re: one iap can't join VC

Controllerless Networks

Reply
Aruba Employee
Aruba Employee
Colin Wang

one iap can't join VC

‎03-11-2015 08:21 PM

Hi expert,

 

Currently ,two iap (i274,i134) have joined the VC and configure static ap ip address . Allow automatic join is enable. new iap i92 has same version as other two iap ,when the iap92 tried to join vc ,some error message shows up :

Rebooting AP due to default-ip is denied in this network (ac:a3:1e:c0:38:ec 10.75.156.83)

and 10.75.156.83 is ap address which selected as VC .

Should I must confiugre static ip for iap92 before it could join vc?

Alert a Moderator
Message 1 of 10
5,687 Views
Reply
0 Kudos
Frequent Contributor I
Swack

Re: one iap can't join VC

‎03-11-2015 08:26 PM

This post is re: phy controller but might be relevant:

http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/ap-s-status-is-quot-denied-quot/td-p/19300
Alert a Moderator
Message 2 of 10
5,683 Views
Reply
0 Kudos
Aruba Employee
Aruba Employee
Colin Wang

Re: one iap can't join VC

‎03-11-2015 08:49 PM

Thanks for reply,but that post is about compass ap ,I am using iap.
Alert a Moderator
Message 3 of 10
5,670 Views
Reply
0 Kudos
Highlighted
Aruba Employee
Aruba Employee
vdhanraj

Re: one iap can't join VC

‎03-11-2015 10:52 PM

Hi Wang,

 

let me understand couple of things here.

 

1. Do you have DHCP in the subnet to provide IP address to IAPs ?

2. Have factory reset the IAP 92 .

 

Please share the outut of "show log system" it wil give some more idea.

 

Feel free for any further help on this.

Alert a Moderator
Message 4 of 10
5,632 Views
Reply
0 Kudos
Valued Contributor II
dhanraj_puduchery@yahoo.com

Re: one iap can't join VC

‎03-11-2015 10:55 PM

Hi Wang,

 

let me understand couple of things here.

 

1. Do you have DHCP in the subnet to provide IP address to IAPs ?

2. Have factory reset the IAP 92 .

 

Please share the outut of "show log system" it wil give some more idea.

 

Feel free for any further help on this.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Alert a Moderator
Message 5 of 10
5,628 Views
Reply
0 Kudos
Aruba Employee
Aruba Employee
Colin Wang

Re: one iap can't join VC

‎03-12-2015 12:09 AM

1.I have tried both enable and disable dhcp ,result is same.

2.yes ,has reset iap92

Aos version is 4.1.1.2 which was thought has tons problem,just tried downgrade AOS.

*********************************************************************************************************
 3/12/2015 15:07:04 PM    Target: colin_i274    Command: show log system 
*********************************************************************************************************

Jan  1 00:00:50  syslog: <341005> <ERRS> |AP colin_i274: |  terminal access is enabled but dropbear is not running, starting
Jan  1 00:00:53  nanny[2445]: <303022> <WARN> |AP colin_i274: |  Reboot Reason: No reboot message found.
Jan  1 00:01:05  cli[2521]: <341317> <WARN> |AP colin_i274@10.75.156.83 cli|  Regulatory table file init at version 1.0_48019, build 9/1/2015.
Jan  1 00:01:05  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Extended ssid enabled
Jan  1 00:01:05  cli[2521]: <341207> <WARN> |AP colin_i274@10.75.156.83 cli|  AP support up to 16 SSID.
Jan  1 00:01:06  cli[2521]: <341172> <WARN> |AP colin_i274@10.75.156.83 cli|  Find enet0 name eth0.
Jan  1 00:01:06  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  cli starting, clearing any dpimgr
Jan  1 00:01:07  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  cli_choose_eth_uplink:eth current uplink set to DHCP
Jan  1 00:01:07  cli[2521]: <341169> <WARN> |AP colin_i274@10.75.156.83 cli|  Add uplink Ethernet 0.
Jan  1 00:01:07  cli[2521]: <341167> <WARN> |AP colin_i274@10.75.156.83 cli|  Uplink eth0 type Ethernet, state INIT->LOAD.
Jan  1 00:01:07  cli[2521]: <341169> <WARN> |AP colin_i274@10.75.156.83 cli|  Add uplink Wifi-sta 6.
Jan  1 00:01:07  cli[2521]: <341169> <WARN> |AP colin_i274@10.75.156.83 cli|  Add uplink 3G/4G 7.
Jan  1 00:01:07  cli[2521]: <341167> <WARN> |AP colin_i274@10.75.156.83 cli|  Uplink  type Dummy, state INIT->LOAD.
Jan  1 00:01:07  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  receive sapd hello for process recovery
Jan  1 00:01:08  cli[2521]: <341174> <WARN> |AP colin_i274@10.75.156.83 cli|  No current uplink, pick the highest one - Ethernet eth0.
Jan  1 00:01:08  cli[2521]: <341263> <WARN> |AP colin_i274@10.75.156.83 cli|  enable uplink eth0.
Jan  1 00:01:08  cli[2521]: <341167> <WARN> |AP colin_i274@10.75.156.83 cli|  Uplink eth0 type Ethernet, state LOAD->PROBE.
Jan  1 00:01:08  cli[2521]: <341265> <WARN> |AP colin_i274@10.75.156.83 cli|  enable ethernet uplink eth0.
Jan  1 00:01:08  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  the ethernet uplink inuse in first time, get ip address.
Jan  1 00:01:08  cli[2521]: <341167> <WARN> |AP colin_i274@10.75.156.83 cli|  Uplink eth0 type Ethernet, state PROBE->UP.
Jan  1 00:01:08  cli[2521]: <341185> <WARN> |AP colin_i274@10.75.156.83 cli|  Retrieving ip address from br0, ip 10.75.156.83, mask 255.255.255.0.
Jan  1 00:01:08  cli[2521]: <341274> <WARN> |AP colin_i274@10.75.156.83 cli|  Update election ip from br0, election ip 10.75.156.83/255.255.255.0.
Jan  1 00:01:08  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  build_my_ip_address: old ip and new ip same; skipping
Jan  1 00:01:08  cli[2521]: <341006> <CRIT> |AP colin_i274@10.75.156.83 cli|  Sending uplink_up msg to sapd
Jan  1 00:01:08  cli[2521]: <341006> <CRIT> |AP colin_i274@10.75.156.83 cli|  trap uplink info.
Jan  1 00:01:08  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  last uplink is null, it's the first uplink, ignore this trap.
Jan  1 00:01:08  cli[2521]: <341173> <WARN> |AP colin_i274@10.75.156.83 cli|  Current uplink set to Ethernet, state UP.
Jan  1 00:01:08  cli[2521]: <341135> <WARN> |AP colin_i274@10.75.156.83 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 0.
Jan  1 00:01:09  cli[2521]: <341135> <WARN> |AP colin_i274@10.75.156.83 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 1.
Jan  1 00:01:11  cli[2521]: <341097> <WARN> |AP colin_i274@10.75.156.83 cli|  recv_image_check: mac-9c:1c:12:c6:37:ca, version-6.4.2.3-4.1.1.2_48114, ccode_idx-156.
Jan  1 00:01:11  cli[2521]: <341005> <ERRS> |AP colin_i274@10.75.156.83 cli|  Drop image check since i am not the Master
Jan  1 00:01:12  cli[2521]: <341135> <WARN> |AP colin_i274@10.75.156.83 cli|  Master Changed - new 127.0.0.1 old 0.0.0.0 current swarm state 1.
Jan  1 00:01:12  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Swarm State Change from Found to Image-ok


Jan  1 00:01:16  cli[2521]: <341097> <WARN> |AP colin_i274@10.75.156.83 cli|  recv_image_check: mac-9c:1c:12:c6:37:ca, version-6.4.2.3-4.1.1.2_48114, ccode_idx-156.
Jan  1 00:01:17  cli[2521]: <341194> <WARN> |AP colin_i274@10.75.156.83 cli|  Loading configuration, func swarm_timer_handler, line 8081.
Jan  1 00:01:22  cli[2521]: <341205> <WARN> |AP colin_i274@10.75.156.83 cli|  Applying enet config : port eth1.
Jan  1 00:01:30  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Swarm State Change from Image-ok to Complete
Jan  1 00:01:31  cli[2521]: <341097> <WARN> |AP colin_i274@10.75.156.83 cli|  recv_image_check: mac-9c:1c:12:c6:37:ca, version-6.4.2.3-4.1.1.2_48114, ccode_idx-156.
Jan  1 00:01:31  cli[2521]: <341165> <WARN> |AP colin_i274@10.75.156.83 cli|  send image match to 10.75.156.81.
Jan  1 00:01:31  cli[2521]: <341097> <WARN> |AP colin_i274@10.75.156.83 cli|  recv_image_check: mac-9c:1c:12:c6:37:ca, version-6.4.2.3-4.1.1.2_48114, ccode_idx-156.
Jan  1 00:01:31  cli[2521]: <341165> <WARN> |AP colin_i274@10.75.156.83 cli|  send image match to 10.75.156.81.
Jan  1 00:01:31  cli[2521]: <341097> <WARN> |AP colin_i274@10.75.156.83 cli|  recv_image_check: mac-9c:1c:12:c6:37:ca, version-6.4.2.3-4.1.1.2_48114, ccode_idx-156.
Jan  1 00:01:31  cli[2521]: <341165> <WARN> |AP colin_i274@10.75.156.83 cli|  send image match to 10.75.156.81.
Jan  1 00:01:42  cli[2521]: <341199> <WARN> |AP colin_i274@10.75.156.83 cli|  send_config_init: send config to slave 10.75.156.81, using url 0, auto save disable 0.
Jan  1 00:51:11  cli[2521]: <341108> <ERRS> |AP colin_i274@10.75.156.83 cli|  sess_validate_sid: 179 invalid session client-10.75.56.3 sid-RLHAQQwsKCRmKEG5G27e.
Jan  1 16:42:26  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Invalid backup image version
Jan  1 16:42:26  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Get backup image info error
Jan  1 16:43:45  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Invalid backup image version
Jan  1 16:43:45  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Get backup image info error
Jan  1 16:55:44  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Invalid backup image version
Jan  1 16:55:44  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Get backup image info error
Jan  1 17:09:11  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Invalid backup image version
Jan  1 17:09:11  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Get backup image info error
Jan  1 17:31:48  cli[2521]: <341108> <ERRS> |AP colin_i274@10.75.156.83 cli|  sess_validate_sid: 179 invalid session client-10.75.56.3 sid-ZTEC3D8HS87iJEiYTSGd.
Jan  1 17:42:11  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Invalid backup image version
Jan  1 17:42:11  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Get backup image info error
Jan  1 17:44:36  cli[2521]: <341132> <WARN> |AP colin_i274@10.75.156.83 cli|  Check sum error for AP-10.75.156.81, slave 50540 vs master 18472, error_cnt 1, recover_sent 0.
Jan  1 17:57:27  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Invalid backup image version
Jan  1 17:57:27  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Get backup image info error
Jan  1 18:14:34  cli[2521]: <341108> <ERRS> |AP colin_i274@10.75.156.83 cli|  sess_validate_sid: 179 invalid session client-10.75.56.3 sid-SVDcZJVgAT8ZmCZeEXjU.
Jan  1 21:21:25  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Invalid backup image version
Jan  1 21:21:25  cli[2521]: <341004> <WARN> |AP colin_i274@10.75.156.83 cli|  Get backup image info error
Jan  1 21:44:57  cli[2521]: <341097> <WARN> |AP colin_i274@10.75.156.83 cli|  recv_image_check: mac-9c:1c:12:cf:f5:d7, version-6.4.2.3-4.1.1.2_48114, ccode_idx-156.
Jan  1 21:44:57  cli[2521]: <341165> <WARN> |AP colin_i274@10.75.156.83 cli|  send image match to 10.75.156.80.


Jan  1 21:50:25  cli[2521]: <341108> <ERRS> |AP colin_i274@10.75.156.83 cli|  sess_validate_sid: 179 invalid session client-10.75.56.3 sid-Wg2dia11s6SBRUbpdxJb.
Alert a Moderator
Message 6 of 10
5,604 Views
Reply
0 Kudos
Valued Contributor II
dhanraj_puduchery@yahoo.com

Re: one iap can't join VC

‎03-12-2015 03:28 AM

Hi Wang,

 

To form a cluster the following point need to be ful filled,

 

1. All IAPs should be in the same VLAN and should have IP address( DHCP or Static) from the same subnet

2. All IAPs should have same Image version.

 

In your case, are you satisfying above points ?

 

As a work around, console the IAP 92 and observer the boot messages and confirm whether is able to get a valid IP and also receiving a Master beacon.

 

Please feel free for any further help on this

 

 

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Alert a Moderator
Message 7 of 10
5,578 Views
Reply
Aruba Employee
Aruba Employee
Colin Wang

Re: one iap can't join VC

‎03-13-2015 01:12 AM

Yes ,I think I got the reason. When I initial one iap and add to vlan ,it only could get ip address from 169 subnet which is diffirence from other ap.

Alert a Moderator
Message 8 of 10
5,552 Views
Reply
0 Kudos
Valued Contributor II
dhanraj_puduchery@yahoo.com

Re: one iap can't join VC

‎03-13-2015 01:25 AM

Hi Wang,

 

I believe in your setup either there is no DHCP available or IAP not able to get IP , coz as you said, new IAP is getting IP from 169.254.X.X which is APIPA ( Default IP) IAP will not join with default IP hence you configure a static IP or configure a DHCP so that new IAP gets a valid IP ( same subnet as the VC) and join the cluster.

 

Hope your issue is resolved,

 

Please feel free to seek any further help on Aruba.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Alert a Moderator
Message 9 of 10
5,549 Views
Reply
0 Kudos
Aruba Employee
Aruba Employee
Colin Wang

Re: one iap can't join VC

‎03-13-2015 01:37 AM

yes,and one kudous for you to support:)

Alert a Moderator
Message 10 of 10
5,537 Views
Reply
0 Kudos
Search Airheads
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

© Copyright 2019 Hewlett Packard Enterprise Development LP
All Rights Reserved.
Powered by Lithium