08-29-2019 07:28 PM
The first 24 ports are 1/10G.Depending on the transceiver you use, port will operate on that speed. The last 2 ports are 40G.
Following link should help you with the supported transceivers:
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | CWNA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Re: Converged Port
09-04-2019 01:51 PM
The CP module supports both Ethernet and Fibre Channel on the same physical 10G port. Each of the 10G ports can be configured individually for FC or Ethernet.
- Ethernet speeds support 1/10G
- When in Fibre Channel mode they support 4/8G FC.
The 40G ports are standard Ethernet only (no FC).