Data Center

Reply
Highlighted
New Contributor

View IP Route Tags

Hi

 

AOS-CX allows you to add tags to routes using route maps or the tag keyword on the end of the "ip route" command.

 

Looking at a route on a Cisco IOS device this rout tag is displayed:

#sh ip route 10.128.1.0
Routing entry for 10.128.1.0/28
Known via "ospf 100", distance 110, metric 9925
Tag 2224, type extern 1
Last update from 10.0.2.33 on Vlan4001, 3d22h ago
Routing Descriptor Blocks:
* 10.0.2.33, from 10.0.0.1, 3d22h ago, via Vlan4001
Route metric is 9925, traffic share count is 1
Route tag 2224

 

AOS-CX only displays the following:

 

show ip route 10.128.1.0

Displaying ipv4 routes selected for forwarding

'[x/y]' denotes [distance/metric]

10.128.1.0/28, vrf default
via 10.0.0.22, [110/225], ospf

 

Is it possible to view the route tags on AOS-CX? 

 

 

 

Highlighted
MVP Guru

Re: View IP Route Tags

You may try again with 10.5 (it has been added recently).

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: