Developer Community

Reply
Highlighted
Occasional Contributor I

How to I config Aruba with Strongswan for VPN connection?

Dear my friend,

I have 100 Aruba 303 devices. I want to configure VPN to manage devices through internet. I am using strongswan malware as vpn server. I have encountered connection problem of AP and strongswan. It is after a period of time, on the strong server, not checking the connection session of the AP to the server vpn. However, when you type 'show vpn status' on the AP, the connection status of vpn is still up. Is there any problem with AP 303, or my strongswan configuration has problems?

Help me please!

Highlighted
Frequent Contributor I

Re: How to I config Aruba with Strongswan for VPN connection?

You‘re trying VPN through VPN?

Sven - AMFX #35
Highlighted
Occasional Contributor I

Re: How to I config Aruba with Strongswan for VPN connection?

I have a CentOS 7 server. Strongswan is installed on the server with authentication method ipsecs ikev1. After installation I connected to the AP over the IP VPN. But then the connection was lost. On the AP, I checked with the command 'show vpn status'. And it said VPN is still UP.

Highlighted
Frequent Contributor I

Re: How to I config Aruba with Strongswan for VPN connection?

Instant APs only support VPN to a Aruba Controller. Or is there a new feature?

Sven - AMFX #35
Highlighted
Occasional Contributor I

Re: How to I config Aruba with Strongswan for VPN connection?

I use this command:

----

vpn ikepsk
vpn primary
vpn backup

----

Highlighted
Frequent Contributor I

Re: How to I config Aruba with Strongswan for VPN connection?

This is not possible. VPN is only allowed to Aruba Controllers.

 

btw: you're not getting many responses because you posted in the wrong forum.


Sven - AMFX #35
Highlighted
Occasional Contributor I

Re: How to I config Aruba with Strongswan for VPN connection?

But, which forum should I ask?

Highlighted
New Contributor

Re: How to I config Aruba with Strongswan for VPN connection?

Hello Viet, I didn't try to make them work yet, but judging from the data sheet for the VIA client, it should be pretty straight forward and without any show stoppers. Ask the mailing list, if you have any concrete problems. Regards Noel Kuntze

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: