Aruba Deployment with Firewalls
04-06-2007 07:25 PM
Note: please remember that the Aruba controllers use both the loopback address and the VLAN addresses for communications with other network elements. If host specific ACLs are used, all controller IP addresses must be included.
Between Master controller and Local controller
- PAPI (udp/8211 and tcp/8211)
- IP-IP (protocol 4) - if L3 mobility is enabled
- IP-IP (protocol 4) and PAPI (udp/8211) - if L3 mobility is enabled
- IPSEC/NAT-T (udp/4500) - if site-to-site VPN is deployed
- GRE (protocol 47) (if tunneling guest traffic over GRE to a DMZ controller)
- PAPI (udp/8211) – If DNS is used for the AP to discover the LMS controller,
an AP will first attempt to connect to the Master controller (note: allow DNS (udp/53) traffic from AP to DNS server as well).
- PAPI (udp/8211) – All APs running as Air Monitors (AM) will have a permanent
PAPI connection to the master controller.
- FTP (tcp/20 and tcp/21)
- TFTP (udp 69) – (for AP-52; for all other AP’s, if there is no local image on the AP, e.g. a brand new AP, the AP will use TFTP to retrieve initial image)
- NTP (udp/123)
- SYSLOG (udp/514)
- PAPI (udp/8211)
- GRE (protocol 47)
- NAT-T (udp/4500)
- TFTP (UDP/69) - note: Not needed for normal operation. If the RAP looses the local image for whatever reason, TFTP is used to download the latest image.
WebUI: Between Network Administrator’s computer (Web browser) all controllers:
- HTTP (tcp/80 and tcp/8888), or HTTPS (tcp/443 and tcp/4343)
- SSH (tcp/22) or TELNET (tcp/23)
- HTTPS (tcp/443)
- HTTP (tcp/80) - this requirement will not be needed in future releases.
- SSH (tcp/22) - for trouble shooting
- SNMP (udp/161 and udp/162)
- PAPI (udp/8211 and tcp/8211)
Allow traffic from the following ports on a as needed basis:
SYSLOG (udp/514) between controller and syslog servers.
TFTP (udp/69) or FTP (tcp/20 and tcp/21) between controller and software
distribution server for software upgrade, or retrieving system logs.
PPTP (udp/1723) and GRE (protocol 47) to the controller if it’s a PPTP VPN server
NAT-T (udp/4500) or ISAKMP (udp/500) and ESP (protocol 50) to the controller if it’s
an L2TP VPN server.
If a 3rd party network management system is used, allow SNMP (udp/161 and udp/162) from the NMS to all controllers (as well as AP’s if Aruba OS version is prior to 2.5).
RADIUS (typically udp/1812, udp/1813, or udp/1645, udp/1646) between controller
and RADIUS server.
LDAP (udp/389) or LDAPS (udp/636) between controller and LDAP server.
NTP (udp/123) between all controllers as well as MMS server to NTP server.
UDP/5555 from AP to Ethereal packet-capture station; udp/5000 from AP to Wildpackets packet-capture station.
Telnet (tcp/23) from network administrator’s workstation to any AP if “telnet enable” is present in the “ap location 0.0.0” section of the controller configuration.
ICMP (protocol 1) and syslog (udp/514) between a controller and any ESI servers.
HTTP (tcp/80) or HTTPS (tcp/443) between a controller and a XML-API client.
10-19-2009 06:28 AM
You would probably get a complete answer if you post in the Airwave forum.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
What if Airwave took over MMS?
10-19-2009 06:45 AM
guide (see Home Documentation). It's on page 25 in the 6.3 guide.
For AWMS to talk to a controller, you need SNMP at a minimum. I would
also recommend SSH for for configuration (including auditing), PAPI for
WMS offload, SNMP traps for IDS tracking (and a few other things). You
may need TFTP for AOS upgrades.
RTLS (5050) from the APs to AWMS is required if you are doing asset tag