Forum Français

Upcoming community maintenance Oct. 27th through Oct. 29th
For more info click here
Reply
Highlighted
Occasional Contributor II

AirWave IAP syslog critical error

Bonjour à tous,

 

J'ai des alertes recurrentes qui apparaissent dans le syslog de mon Airwave :

cli[2639]: cli_rap_send_tunnel_info(5617) client subnet info (master) vlan 900 subnet 192.168.200.0 mask 255.255.255.0 

 

cli[2411]: cli_rap_recv_tunnel_info(5503) client subnet info (slave) vlan
900 subnet 192.168.200.0 mask 255.255.255.0 

 

J'ai cherché dans les doc decrivant les messages syslog mais ceux ci n'apparaissent pas, quelqu'un pourrait m'éclairer ?

(pour info firmware 6.5.4.9)

 

Merci d'avance

 

Olivier

 

Highlighted
MVP Guru Elite

Re: AirWave IAP syslog critical error

Bonjour Olivier,

 

tu utilises le mode IAP-VPN ? (les bornes IAP montent un tunnel vers un contrôleur ?)

 



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP
Highlighted
Occasional Contributor II

Re: AirWave IAP syslog critical error

Hello Alexis

 

Non pas de mode IAP-VPN, simplement l'utilisatation de VLAN differents selon les SSID.

 

Olivier

Highlighted
MVP Guru Elite

Re: AirWave IAP syslog critical error


@Olivier_1968 wrote:

Hello Alexis

 

Non pas de mode IAP-VPN, simplement l'utilisatation de VLAN differents selon les SSID.

 

Olivier


ok, DHCP au niveau des bornes ? à quoi corresponds les plages IP indiqués ?



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP
Highlighted
Occasional Contributor II

Re: AirWave IAP syslog critical error

Yes, DHCP depuis le controlleur virtuel (IAP) la plage d'adresses correspond au subnet du Vlan. 

Highlighted
New Contributor

Re: AirWave IAP syslog critical error

We have the same issue with thousands of syslogs per day (in Airwave and on IAP "sh log vpn"):

 

cli[3801]: cli_rap_recv_tunnel_info(3934) client subnet info (slave) vlan
700 subnet 0.0.0.0 mask 255.255.255.255

cli[3801]: cli_rap_recv_tunnel_info(3934) client subnet info (slave) vlan
700 subnet 0.0.0.0 mask 255.255.255.255

cli[2714]: cli_rap_recv_tunnel_info(5551) client subnet info (slave) vlan 700 subnet 172.16.200.0 mask 255.255.248.0

 

Controller-Version: 6.5.4.9

IAP-105 Firmware: 6.4.4.8-4.2.4.11_64223

IAP-VPN with Centralized L2 with primary/Backup Controller:

 

IAP-ConfigIAP-ConfigPrimary Controller VLANPrimary Controller VLANBackup Controller VLANBackup Controller VLANIAP DHCP-ConfigIAP DHCP-Config