Higher Education

Reply
This is an open group. Sign in and click the "Join Group" button to become a group member and start posting.
Frequent Contributor I

Re: RF Optimization Profile

What version of 6.3 are you running?

Frequent Contributor II

Re: RF Optimization Profile

Nils - if you mean me, I am now running 6.3.1.5, been happy with it so far...

Scott McNeil - Sr. Network & Security Engineer, Global Process Automation
Network+ | CWNA | CWTS | ACSP | ACMP | ACMA | BREC
Frequent Contributor I

Re: RF Optimization Profile

Thank you Scott

 

What wireless controllers are you running your production? I have some M3, 3400, and 7000 series controllers and had some issues running 6.3 on the M3 cards.

 

Have you heard anything regarding version 6.3.1.7?

Frequent Contributor II

Re: RF Optimization Profile

Nils,

 

We are a smaller outfit wireless wise. I am currently running a 3600US, a 3400US and a 3200XM as locals and have a 3200XM as a dedicated master - all on 6.3.1.5. I had a small hiccup with some other issues later and during the TAC support call they did recommend bumping up to the 6.3.1.7, but then again TAC usually recommends bumping up to the latest revs :-)

Scott McNeil - Sr. Network & Security Engineer, Global Process Automation
Network+ | CWNA | CWTS | ACSP | ACMP | ACMA | BREC
MVP Expert

Re: RF Optimization Profile


@nilslau03 wrote:

Thank you Scott

 

What wireless controllers are you running your production? I have some M3, 3400, and 7000 series controllers and had some issues running 6.3 on the M3 cards.

 

Have you heard anything regarding version 6.3.1.7?


What issues have you noticed on M3 cards?

 

I am getting ready to upgrade from 6.1.3.9 to 6.3.1.7 and I am upgrading a pair of 3600 master controllers with 2x3600 DMZ controllers and 2x6000 chassis with 3xM3 cards in each acting as locals to the pair of Master 3600s. 

 

Customer wants the configuration to remain the same, no changes, that means no client match (for now) and I have to disable airgroup upon upgrade.

 

Pasquale M. | Senior Network Solutions Consultant
ACDX #420 | ACCA
[If you found my post helpful, please give kudos!]
Highlighted
Frequent Contributor I

Re: RF Optimization Profile

Scott they recommended me to upgrade to 6.1.3.7 as well, according to TAC this version fix several bugs found on previous versions.

 

Pasquale,

 

I have a mix of AP 70, 105, 125, and 135. In my case AP 125 were dropping connections in high density areas such as classrooms. Same AP in the hallway were working fine. I experience this accross campus and two M3 cards have memory utlization spikes that were causing the STM module to not respond. They told me to upgrade to the latest code. I am planning an ugrade in two weeks.

 

Nils.

 

MVP Expert

Re: RF Optimization Profile

Thanks for the quick response nilslau03.
My deployments has 105s everywhere. I don't expect issues but you never know.

Thanks for providing insight
Pasquale M. | Senior Network Solutions Consultant
ACDX #420 | ACCA
[If you found my post helpful, please give kudos!]
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: