Reply
Highlighted
New Contributor

Question about beacons - tags - Meridian

Hi Airheads community,  I have a question about Aruba location services

  Aruba tags and beacons can be located by android and IOS devices, but what if I need to build an app in a server that reads the location (every minute) of each beacon and store the data in a database? there an API for Python or .NET? or is it obligatory to pass through Meridian?

 

thanks and regards


Accepted Solutions
Highlighted
New Contributor

Re: Question about beacons - tags - Meridian

Hi

Data consume by meridian only.

View solution in original post


All Replies
MVP Expert

Re: Question about beacons - tags - Meridian

Hi,

Beacon guide for your reference

https://community.arubanetworks.com/t5/Validated-Reference-Design/Aruba-Beacons-Validated-Reference-Design/ta-p/249198

 

Management of Aruba Beacons is done through Meridian cloud editor only it does not support any third party cloud/server.

 

 


Pavan Arshewar | ACCP

If my post address your queries, give kudos and accept as solution!
NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Highlighted
New Contributor

Re: Question about beacons - tags - Meridian

Ok, I understand that the managment of the beacons is done throught Meridian. But what if I need to consume the information provided by the beacons with a server app? Or also, this can be did it just by meridian?

Highlighted
New Contributor

Re: Question about beacons - tags - Meridian

Hi

Data consume by meridian only.

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: