Q:
Can we change the device to manage read/write mode in Airwave by making the configuration "Good" with mismatches ignored?
In APs/Devices >> Audit page of the device we have an option to customize and select the settings to ignore mismatch for showing the config status as "Good".
We would not recommend to change the device to manage read/write mode by ignoring the mismatches. If we are ignoring the mismatches, that settings will be ignored during a configuration audit and due to that configuration status will show as "Good" (Ignoring Mismatches).
But this ignored configuration will still get applied whenever a configuration is pushed to the device. Due to that we would not recommend to change the device to manage read/write mode in this scenario.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.