Requirement:
Instant AP support clarity starting version 6.5.1.0-4.3.1.0.
Prerequisites
IAP running version 6.5.1.0-4.3.1.0 or above.
Airwave running version 8.2.3.1 or above
We will need to enable Clarity function on IAP. This can be done via Airwave or directly on IAP.
From IAP CLI:
18:64:72:c9:c4:98# configure terminal We now support CLI commit model, please type "commit apply" for configuration to take effect. 18:64:72:c9:c4:98 (config) # clarity 18:64:72:c9:c4:98 (clarity) # 18:64:72:c9:c4:98 (clarity) # inline-auth-stats 18:64:72:c9:c4:98 (clarity) # inline-dhcp-stats 18:64:72:c9:c4:98 (clarity) # inline-dns-stats 18:64:72:c9:c4:98 (clarity) # inline-sta-stats
18:64:72:c9:c4:98 (clarity) # end 18:64:72:c9:c4:98# commit apply committing configuration... configuration committed.
From IAP WEBUI
From Airwave Template :
Add the below config lines towards the end of the template.
clarity inline-sta-stats inline-auth-stats inline-dhcp-stats inline-dns-stats
After adding the config, we will be able to see the Clarity data populating on Airwave.
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.