PROBLEM:Upgrade fails with an error like this:"scriptlet failed, exit status 255"SOLUTION:This happens occasionally when selinux is set to permissive mode. You can resolve the problem by disabling selinux with the following procedure:1. Open /etc/selinux/config with the pico text editor:# pico /etc/selinux/configand changeSELINUX=permissive to SELINUX=disabled2. Run a make:# root; makeThat usually resolves the problem. Sometimes, because selinux is a kernel module, you have to reboot the system and repeat the make process:# reboot# root; make
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.